LabOne

Do you want to use a Raspberry Pi to control your Zurich Instruments devices? Although instruments are traditionnaly hooked up to a measurement computer, some applications might require a computer with a smaller footprint or lower power requirement. This blog post will walk you through the necessary steps and help get you started.

Resonators with very high Q factor are notoriously complicated to lock because of the steep slope phase at resonance. Precise determination of phase setpoint and gains can be highly time consuming since very high frequency resolution is required. This blog explains how to optimize the PLL by starting with an educated guess and optimizing everything in closed-loop, which is much faster than conventional open-loop characterizations.

Lock-in amplifiers are extremely versatile and used in a plethora of applications ranging from optics and photonics, nanotechnology, spm, and sensing, among others. In this blog, you will learn how to use the MFLI Lock-in Amplifier to carefully assess the experimental conditions and prepare your setup for the best measurement outcome.

The most beautiful measurement data is useless if it cannot be saved and analyzed. Choosing the data transfer rate from the instrument to the host computer wisely is important to capture the information of interest and avoid measurement artifacts. In this blog post, we will look at the data transfer concept of a Zurich Instruments lock-in amplifier in more detail and provide guidelines on how to choose it.

When operating qubits, speed and high system utilization are key to achieving rapid progress. In this blog post, you’ll find a collection of five important tips to optimize the throughput of your Zurich Instruments Quantum Computing Control System (QCCS) and perform measurements faster than ever!

In this blog post, we intend to shed light on zhinst-toolkit, our all-new high-level Python API. It aims to provide a pythonic approach to interface the test and measurement instruments from Zurich Instruments.