Company Blog

This blog post presents the questions and answers raised during the DLTS User Meeting 2023. The meeting intended to bring together the community who may face common measurement challenges and allow them to share knowledge and expertise.

现代物理学中有一个经典的实验，即测量电阻上的热噪声电压，首次测量是由 John B. Johnson 于1926年在贝尔实验室中首次完成，并由 Harry Nyquist完成理论解释，因此热噪声又被称为Johnson噪声或者Johnson-Nyquist噪声。其本质来自于载流子的无规则热运动，这一实验也可以用作对于玻尔兹曼常量的计算，本实验将对于纯电阻器件进行测量其热噪声电压，并给出测量建议。

This blog post shows the ease of set-up of the MFIA to measure capacitive transients for self-build DLTS. The combination of MFIA plus third-party temperature stage brings the possibility to tune your DLTS measurement parameters to suit your sample. Home-building your DLTS system with the MFIA gives you flexibility and the freedom to choose the test signal amplitude, frequency and even the mode of stressing pulse. 

本文介绍了使用MFIA测量OLED单元C-V曲线的基本方法。

Drive level capacitance profiling (DLCP) is a powerful technique to accurately determine the charge carrier density in semiconductors when deep level states are present. It is often considered an improvement over the widely applied characterization technique known as capacitance-voltage (C-V) profiling...

The MFIA is a high-precision impedance analyzer that can run measurements in either 2-terminal or 4-terminal mode. What is the right setting for your measurement? This blog post addresses this question and explains how to use the MFIA to its full capability...

In electrochemistry, the characteristics of a given process can be assessed by electrochemical impedance spectroscopy (EIS). A semicircle in the Nyquist plot usually corresponds to electrochemical processes that can be modelled as a parallel connection of a resistor (R) and a capacitor (C). The diameter of the semicircle provides the value of R, while the associated time constant (also known as relaxation time) is given by RC...

The MFIA is a high-precision impedance analyzer. It measures voltage, current and phase to calculate impedance. As is the case for most impedance analyzers, the measurement circuit is designed so that the device under test (DUT) is operated under floating conditions, which means that none of the terminals of the DUT is connected to the ground...

Swiss chocolates are famous worldwide thanks to their high quality of taste. Switzerland is also renowned as the country with the highest chocolate consumption per capita. Today, many popular brands can be found even in the supermarket. Are you curious about what makes the chocolates special? And which non-destructive technique (NDT) can be employed to measure them?

This blog post presents a selection of questions and answers raised during the DLTS User Meeting 2022. The meeting intended to bring together the community who may face common measurement challenges and allow them to share core competencies and know-how.

This blog post accompanies the webinar, which introduced basics of electrochemical impedance spectroscopy (EIS) and provided practical tips & tricks to measure EIS consistently. We share the recording, additional information and answers to the questions asked by the attendees during the webinar.