주요 콘텐츠로 건너뛰기
Search

Company Blog

5 Tips to Improve Your Impedance Measurements

02.04.2020

MFIA Setup

Impedance applications often have different requirements, but the common goals are similar; get the best possible accuracy, precision, and repeatability. This blog post will guide you to the best measurement settings to improve your impedance measurements. It will help you to get the best data and save your valuable time...

Electrochemical Impedance Spectroscopy of Tap Water

06.01.2020

Nyquist Plot

Electrochemical impedance spectroscopy (EIS) is a popular non-destructive technique to characterize the physicochemical properties of materials, particularly at the solid-liquid (or electrode-electrolyte) interface. Despite the complexity of the measured data, EIS can be used to study many electrochemical devices (batteries, supercapacitors and fuel cells), dielectric coatings, as well as microfluidic chips...

Gated Data Transfer for Increased Data Sampling Rate

19.12.2018

Plotter Overview

Introduction For measurements of signals that change rapidly, for example, when measuring capacitance transients in deep level transient spectroscopy (DLTS), high temporal resolution is required. In its standard operating configuration, the MFIA (or the MFLI with the MF-IA option) can sample and transfer impedance data at a continuous rate of...

Square pulses for DLTS Measurements on the MFIA

22.08.2018

MFIA with MFITF

Introduction This blog post shows how to produce square voltage pulses and capture the resulting capacitance transients on a short timescale (20 us), for example, for deep level transient spectroscopy (DLTS) measurements. Using the LabOne ® Threshold Unit (which comes as a standard with the MFIA), it's possible to produce...

The Nyquist Diagram for Electrical Circuits

11.01.2017

Schematic

The Nyquist diagram of a transfer function is a parametric plot of its imaginary part versus real part as the frequency sweeps in a certain range. When dealing with electric circuits, the transfer function is the immittance of the circuit, i.e., it can be either the impedance or the admittance of the circuit...

문의하기